UNIMEC - Tecnologie per l'edilizia -

INSULATED SINGLE BLOCKS

 
It width of 2 mt. allow to be transport easy
INSULATED BOX MOD. FG12B
 

Model Dimensions
exterior
Dimensions
interior
Weight
  mt. mt. Kg.
FG12 B30 3,10 x 2,03 x 2,45 2,92 x 1,95 x 2,20 470
FG12 B30E 3,10 x 2,03 x 2,45 2,92 x 1,95 x 2,20 460
FG12 B40 4,10 x 2,03 x 2,45 3,92 x 1,95 x 2,20 560
FG12 B40E 4,10 x 2,03 x 2,45 3,92 x 1,95 x 2,20 550
       
STANDARD EQUIPMENT
Door, windows, electric system, magnetotermic switch, pvc.
OPTIONAL ACCESSORIES
On request we can supply: partitions, special types and dimensions of casing, electrical and sanitary fittings, ventilator/fans, convectors, internal accessories, etc.
 
On request interior height mt. 2,50 with exterior height mt. 2,75
additional weight Kg. 55

EASY TANSPORT
Thanks to its width of 2 mt. It can be easily transported also with small and medium vehicle
 
FRAME CASING
Made form galvanised steel tubes with profiles assembled between them. Thank to exterior covering of the box angles with steel profiles the frame is strongly reinforced Comprises a door and window in anodised aluminium.

(A) COVER
Made by insulated panels with iron armature and foamed polyurethane with deep fret on the upper profile. The lower part and isolation are the same as the wall side panels. Rain flows into the gutters made by a particular profile in the upper frame and then drains away through special holes.
(B) FLOOR (C) WALL SIDE PANEL
Made by waterproof, wooden panels, 18 mm supported by thick galvanized steel profiles, the upper surface is covered by antistatic linoleum. All around the floor perimeter and in the interior part of the angles is settled a painted steel baseboard that make the frame stronger.
Made by insulated panels with iron armature and foamed polyurethane of thickness 40 mm with: exterior surface made in sheet of painted with coil coating system of thickness 0, 5 mm and insulation made with foamed polyurethane (PUR) with high insulation power and continuous application.
D) ANTI-INFILTRATION SYSTEM ELECTRIC SYSTEM
Important difference from other common insulated boxes is that the water rain flows 10 cm under the floor avoiding infiltration Made respecting the rules in force it includes: light pint, current tap, magnetothermic interrupter, derivation box for connecting to the net
INSTRUCTION BOOKS  
All insulated Boxes are provided by assembling instruction book together with CE rules conformity.  


































* * *


* * *


Specifications and measurements are not binding. UNIMEC s.r.l. reserves the right to modify products without prior notice. The models illustrated replace all previous models.The photographs and notes contained in this catalogue aim only to introduce the products shown.