UNIMEC - Tecnologie per l'edilizia -
Richiesta Informazioni


FG 3 lt 300 - lt 350
Professional tilting mixer with crown

DRUM IN PRESSED STEEL
The absence of welding angle makes the cleaning after the use easy. The bottom of the drum of 3 mm. thick can support without effort sollecitations during continuos works.

MOTOR TRASMISSION WITH TWO-RACE PULLEY

MIXING SYSTEM
WITH THREE BLADES AND COUNTER-BOTTOM
Studied for having a bigger speed and homogeneous mixing.

BIG DIMENSION UNIVERSAL CABIN IN COMPLIANCE WITH CE RULES
Consent to be adapted at the majority of the motor electric and permit an easy reparation of the motor.

MECHANISM COMPLETELY DISASSEMBLED
To make the reparation and sustitutions easier even at distance of years.

ELECTRIC MOTOR PROTECTOR
The amperometric sound stop the motor when it is overheated to avoid that it blow out.

TOWING BAR
Fit up for the manual shift.

SPECIAL NITRO DRESSING
Consent to the mixer to maintain its colour at a distance of years.
CONCRETE MIXERS
Professional tilting mixer with crown
FG3 lt 300 / lt 350

TECHNICAL DATA U.M. FG3-300 FG3-350
Drum capacity lt. 312 352
Mixing capacity lt. 255 280
Monophases electric motor HP (kW) 1,5 (1,1) 1,5 (1,1)
Threephases electric motor HP (kW) 1,5 (1,1) 1,5 (1,1)
Diesel motor HP (kW) - -
Gasoline motor HP (kW) - -
Noise emission level db (A) <80 <80
Overall dimensions L x W x H cm 195x100x150 195x100x150
Machine weight Kg. 215 221
Accessories upon request      

ADJUSTABLE TRANSMISSION SYSTEM EASY TILTING
Composed by a fused pinion at 180 Brinner resistance. Crown teeth positioned in the inferior part make the mixer extremely silenced. Thank to the steering wheel of diameter 610 mm. and to the fused height-resistance gears reductions.
PROTECTION FOR GEARS
All UNIMEC mixers are furnished with tilting-crown cover and protection for the steering wheel. The tilting-control pedal is protected from the accidental operation.
ELECTRIC BOX WITH:
- Mush-room-head pushbutton
- Telereductor fuse holder
- Current tap IP 55 against sprikle of water
- Amperometric safety for the motor
(FG3 version)
Specifications and measurements are not binding. UNIMEC s.r.l. reserves the right to modify products without prior notice. The models illustrated replace all previous models.The photographs and notes contained in this catalogue aim only to introduce the products shown.