UNIMEC - Tecnologie per l'edilizia -

SILENCED MIXERS
FG4X lt 250 - FG3X lt 320
Silenced version without crown with motor reduction
PARTICULARLY FITTED FOR BUILDING YARDS IN HISTORICAL CENTRE OR NEAR A BUILT-UP AREA
MORE STABILITY
The "Z" frame guarantee a big stability of the mixer and makes the discharging of the concrete very easy in both discharging side.
DRUM IN PRESSED STEEL
The absence of welding angle makes the cleaning after the use easy. The bottom of the drum of 3 mm. thick can support without effort sollecitations during continuos works.
MIXING SYSTEM WITH THREE BLADES
Studied for having a bigger speed and homogeneous mixing.
ELECTRIC BOX WITH:
- Mush-room-head pushbutton
- Telereductor fuse holder
- Current tap IP 55 against sprikle of water.
- Amperometric safety for the motor (FG3X version)
EASILY TILTING OF THE DRUM
Thank to the reduction gear the tilting of the mixer can be done without any effort. The steering wheel makes the tilting gradual and very controllable.
STEERIN WEEL INCLINATION
User can control the concrete even during the tilting of the drum.
Silenced version without crown with motor reduction
FG4X lt 250 / FG3X lt 320

TECHNICAL DATA U.M. FG4X-250 FG3X-320
Drum capacity lt. 252 352
Mixing capacity lt. 200 255
Monophases electric motor HP (kW) 0,75 (0,55) 1,00 (0,75)
Threephases electric motor HP (kW) - -
Diesel motor HP (kW) - -
Gasoline motor HP (kW) - -
Noise emission level db (A) <80 <80
Overall dimensions L x W x H cm 120x80x156 130x90x156
Machine weight Kg. 145 185
       




359° DISCHARGING THE MOTOR REDUCTION
Concrete can be discharged in both sides. Thanks to the particular frame the discharging tank can be lift up directly by a crane or any other lifting machine. It permit efficient work and unbelievable silence.
MOTOR REDUCTION PROTECTION
PROTECTION FOR GEARS ELECTRIC MOTOR PROTECTION
All UNIMEC mixers are furnished with tilting-crown cover and protection for the steering wheel. The tilting-control pedal is protected from the accidental operation. The amperometric sound stop the motor when it is overheated to avoid that it blow out. (FG3X version)

Specifications and measurements are not binding. UNIMEC s.r.l. reserves the right to modify products without prior notice. The models illustrated replace all previous models.The photographs and notes contained in this catalogue aim only to introduce the products shown.